Control Reversing Valve, Divert Seat Valve, Reversing Valve,

Applications 
The divert seat valve is applied to the food-processing industry, beverage, pharmaceutical and fine chemicals industries. 
Seat valves are operated automatically by a single-acting or a double-acting pneumatic actuator. By supplying compressed air, the shaft is moved to place the valve in the "open" or "closed" position. 
This valve can bear high pressure up to 30 bar, but depend on the type of actuator 
The 180o rotation of the pneumatic cylinder to realize the interchange of normally open and normally closed. 
Design and features 
Size: DN25/1" to DN 100/4" 
Normally closed (NC) in the standard version. 
Hygienic design according to 3A standard 
360° Adjustable body 
Easy assembly / disassembly of internal parts by loosening a clamp fastener 
Standard weld connection (mm or inch) 
Materials 
Parts in contact with medium: AISI 316L, AISI 304 
Other parts in stainless steel: AISI 304 
Gasket: EPDM according to FDA 1 77.2600 
Internal surface finish: Ra<0.8μ M 
External surface finish: Sandblast or mirror polish 
Techical specifications 
Size: DN25-DN100/1"-4" 
Working temperature: -10º C to 120º C (EPDM) 14° F to 248° F, 140º C/284° F (SIP, max. 30min) 
Max. Working pressure: 10bar 145PSI 
Compressed air pressure: 5-10 bar 
Air connecitons: G1/8" (BSP) 


Options 
Gaskets: FPM (viton (R)) in compliance with FDA 177.2600 
Connections: DIN, SMS, RJT, IDF 
Double-acting pneumatic actuator 
External position sensor 
Steam barrier (if shaft sterilisation is required) 
Body jacket insulation 
Valve position regulator 
Double stop actuator 
Diaphragm type valve cavity 
C-TOP control unit 
Surface finish: Ra≤ 0.5μ M