Construction
1, according to the requirements of the room and drawings to build curtains box, if you do not need to directly install the curtain rod curtain box, in the installation of curtain rods, window frames should be re-opening distance and curtain rod thickness and length.
2. When building a panel curtain box, first make a 7-shaped frame pinned to the top, and both sides should be sealed with wood panels. Vertical frame under the mouth using a 20 * 18mm wooden bar reinforcement, nailing, to prevent deformation, such as the re-sealed nails decorated with water, do mixed water paint must be covered by the base level smooth.
3. When the window cover is constructed with blockboard or density board, the base board shall be fixed on the keel of the window frame base, and then the nail shall be nailed; the shape-shaped nail shall prevent curling of the line, the angle shall be dense and smooth, and the window cover shall be The mouth should use large marble to avoid deformation due to moisture.
4. After the door cover is made of wood, the frame shall be planed and straightened, then installed on the wall in the assembly molding, covering the base board and the veneer.
acceptance
1. The door cover should be vertical, the veneer should be flat and square, and there should be no big head or bell mouth phenomenon.
2. The cutting angles of wooden doors and window covers are clean, joints are thoughtful, the appearance is creamy, no planing, burrs.
Lift Table
GUANGDONG NIULI LOGISTICS MACHINERY TECHNOLOGY CO.,LTD , https://www.gdniulilogistics.com