How to adjust the rotary crusher discharge port?

After the crushing cone or the lining of the frame is worn, in order to ensure the size of the ore discharge, it is necessary to restore the original venting width. The adjustment method is to increase the crushing cone and reduce the discharge port. If the crushing cone has been raised to the apex and the discharge opening is not restored to its original width, then the replacement of the rack or the shredded liner should be considered or replaced at the same time. When raising the crushing cone, first remove the nut on the beam, then screw the lifting ring into the wire hole at the upper end of the crushing cone main shaft, and then use the crane to lift the crushing cone. The height of the lifting should be higher than originally expected. The increased distance is 5-15 mm higher.

After the crushing cone is lifted, turn the adjusting screw down, press the sleeve and the sleeve, and then return the screw. Then remove the key and screw the nut down until it comes into contact with the pressure sleeve. Then measure the width of the discharge opening. After meeting the specified requirements, clean up, top up the lubricant, and finally install the cap.

Metal Wood Acrylic Display Furnitures

Our main products are Metal Wood Acrylic Display Furniture, Wood Rack Fixtures, Skincare Display Fixtures, Fragrance Counter Display, Skincare Bar ,Beauty Bar,Skincare Bay,Makeup Display Shelving and all kinds of Floor Display and fixtures. We have implemented a strict and complete quality control system involved in all producing procedures, ensuring the products can meet quality requirements of customers. To learn more about what we can do for you, contact us at any time. Looking forward to establishing good and long-term business relationships with you for mutual benefits.

Metal Wood Acrylic Display Furnitures,Custom Display Cabinet,Custom Perimeter Storage Cabinet,Custom Fashion Perimeter Cabinet

Dongguan Golden Memory Display Products Co., Ltd. , https://www.gmdisplay.cn