How to use transmission oil correctly
Check the amount of automatic transmission fluid
Please check the automatic transmission fluid level regularly.
The amount of automatic transmission fluid will change due to temperature. Although the optimal timing for checking the automatic transmission fluid is 30 minutes after the vehicle is driven, it can also be checked after warming up according to the following procedure.
1 If the transmission fluid level is too low, it will cause slip; too high will produce foam, oil loss and automatic transmission failure.
2 Use of non-specified oil may cause malfunction and damage to the automatic transmission.
In order to avoid sudden movement of the vehicle, the parking brake should be pulled down and the brake pedal pressed before shifting.
1 Park the car on a flat surface and pull on the parking brake.
2 Idle the vehicle for 2 minutes.
3 Depress the brake pedal and slowly slide the stopper bar past all gears and place it in the P position.
4 When the engine is idling, remove the ruler, wipe it clean, and then put it back in again.
5 Pull out the ruler again to check the liquid level.
If the oil temperature has reached the normal operating temperature (about 75 degrees). The liquid level should be between two nodes at 75 degrees.
The 25 degree node is only used as a reference. It cannot be used as a point that determines the height of the liquid surface.
The new automatic transmission fluid should be red to distinguish it from engine oil and antifreeze. The red colorant is not a mark for the quality of the transmission fluid and will lighten over time. When the vehicle is moving, the color of the automatic transmission fluid darkens. The color will eventually become light brown. Therefore, according to the table earlier in this chapter, you should regularly change the automatic transmission fluid to the Dongfeng Yueda Kia service shop.
Reflex sights, also known as red dot sights, are a type of non-magnifying gun sight used on firearms to improve target acquisition and accuracy. They work by projecting an illuminated aiming point, such as a red dot or a green dot, onto a lens that the shooter looks through. This dot is aligned with the firearm's barrel, allowing the shooter to quickly and accurately aim at the target.
Reflex sights offer several advantages over traditional iron sights, including:
Faster target acquisition: The illuminated dot is easy to see and enables the shooter to quickly acquire and maintain a sight picture on the target.
Improved accuracy: The simple, uncluttered sight picture helps shooters maintain proper sight alignment and focus on the target.
Better low-light performance: The illuminated dot is more visible in low-light conditions compared to iron sights.
Unlimited eye relief: Reflex sights don't require the shooter to maintain a specific distance between their eye and the sight, providing more flexibility in terms of shooting positions and firearm configurations.
Reflex sights are popular among recreational shooters, competitive shooters, and law enforcement officers for their ease of use and accuracy improvements. They are commonly used on handguns, rifles, and shotguns.
Red Dot Sights,Tactical Shooting Accessories
Guangzhou Miaozhun Jie Trade Co.,Ltd. , https://www.focuhunter.store