The vehicle walk-in constant temperature and humidity laboratory is a test device that can put a car into the studio and then simulate the different temperature and humidity environment to test the car. It sounds like a test box with a low price, and the actual price of this device is really not low, roughly between hundreds of thousands and millions. This is a huge sum for Xiaobian, so you can only be as cautious as possible when choosing, and avoid buying a lot of test cases.
For the whole vehicle walk-in laboratory for testing, Zui is important in terms of the quality and performance of the equipment. However, these two aspects are more noticed when selecting, that is, some users may not be particularly aware of it. Therefore, in the process of selection, we will pay more attention to the accessories of the equipment. I feel that the quality of the equipment is definitely good. However, in fact, only the accessories of the equipment, there must be various failures during the use. If there is no fault, you don't need to buy a test box. You just need to buy the accessories and assemble them yourself.
In order to select a high-quality vehicle walk-in laboratory, it is necessary to pay more attention to the equipment control system, which is the core part of the test box, and is also the part that most domestic equipment does not have. If all the manufacturers have their own core technology, the domestic test box will not be inferior to the imported test box brand.
There is also the performance of the whole vehicle walk-in laboratory. In this respect, Zui first knows the details to the technicians clearly, knows exactly what kind of environment they need for the test, and then explains them with the manufacturer. After that, as long as you pay attention to the test equipment, if you do not meet the requirements, then you should communicate with the manufacturer in time. If the difference in performance parameters is determined to be particularly large, Zui will return the equipment to the manufacturer; The box is not available for testing at all.
This product belongs to the second era crylic acid structural glue developed by the freshest technology from German. It has rapid solidification at normal temperature, multi-purpose, powerful strength, long shelf life, powerful peel strength, aging-resistance, climatization- resistance and easy for mixing operation and application. It can availably adhesive the surface with a little water or oil. The general function is better than common structural glue.
Scope of application:
Quick adhesive and seal for metal, plastic (PVC, ABS, PS, PC), pottery, wood, polystyrene, glasses and cements etc. or quick bond and repair of motors, motorcar, tractor, electric engines, instruments ,washing machine, crafts, weaving machine, metallurgy and smelting machine and refrigerator etc.
Using Method:
Remove the oil, dust from the surface and keep clear, dry.
2. Paste evenly at 1:1 from two tubes, paste separately on each side and press for solidification. Normally solidify after 5-8 at normal temperature, reach the highest at 24 hours
Warning:
1. The taking glue tool could not mix use, should be tightly sealed,
do not mix Cap A and B.
2. The glue quantity should not exceed, use at the scene. The operation place should be ventilate and far from fire.
3. Avoid the skin contact, if touches the skin, clean with soap water, if touches the eye carelessly, uses the massive clear water flushing immediately, go to hospital for serious situation.
4. Do not get into mouth, keep out reach of kids.
5. Make a trial usage in advance to avoid mistake.
Auto Parts Glue,Acrylic Adhesive,Tire Patch Glue,Acrylic Adhesive Glue
Hunan Magpow Adhesive Group co.,ltd , https://www.magicglue.net