Do you know the unloading steps for the powdered material carriers? There may be some owners who will say: This is not the case. Simple. Really simple? Often you only know about, some of the details will be ignored, Xiaobian today for the owners of friends to share the correct unloading operation steps of the powder material transporter, allowing you to use more secure, more durable vehicles.
1. Before discharge, check whether the unloading dish valve, external air source interface, exhaust valve, and the two inlets are closed and tightened. If they are not tightened, tighten them first to prevent air leakage.
2. Start the engine and shift the transmission to neutral. At the same time, depress the clutch pedal to completely separate the transmission from the engine.
3, open the power take-off solenoid valve switch, while slowly release the clutch pedal, so that the air compressor rotation.
4. Adjust the operating handle of the operating mechanism to adjust the air compressor speed to approximately 900 r/min and stabilize it.
5, when the pressure reaches 0.18MPa, first open the blowpipe, and then open the front and rear warehouse discharge disc valve, start unloading, after which the air compressor pointer will stabilize a certain value.
6, when the pressure dropped to 0.04Mpa, after the warehouse has been unloaded, close the blowpipe, after opening and closing the disc valve a few times, and then the rear compartment valve and the rear compartment intake valve is closed, that is, only the front warehouse discharge After that, the pressure will rise and stabilize to a certain value.
7. When the pressure of the barometer reaches 0 MPa, the unloading is completed, the air compressor is turned off (closing the power switch), and the unloading disc valve is closed.
A pressure vessel is a vessel that can withstand high pressures and is commonly used for storing, transporting, and processing various gases, liquids, and gaseous liquid mixtures. The pressure vessel is mainly composed of vessel body, flange, seal, support and accessories. Common pressure vessels are gas cylinder, gas storage tank, distillation tower, reactor and so on.
The design and manufacture of pressure vessels must comply with relevant national standards and specifications, and pass strict inspection and testing to ensure their safety and reliability. During use, you must comply with the operation regulations and safety precautions, and periodically check and maintain the device to ensure its normal operation and safe use.
The main business scope is various heaters, waste heat boilers, pressure vessels, supportingair preheaters, air coolers, furnace accessories and accessories, and provide equipment installation, with EPC ability of projects. At present, our customers have covered all large and medium-sized petrochemical enterprises in China and established long-term strategic cooperative partnership with them. Products are exported to Southeast Asia, Middle East, and other regions.
Pressure Vessel,Reactor Tanks Vessel,Reactor Equipment Sales,Stainless Steel Reaction Reactor
Jiangsu Gelan Environmental Technology Co., LTD , https://www.etfiredheater.com