PTFE Gasket in Irregular Part Used for Bearing Sleeve for Anti-Pollution Machinery (such as textile, paper, pharmaceutical, food machinery) ;
Description
According to customer's requirements or drawings, PTFE special shape articles are made from high qualify PTFE resin, are finished by first molding and then machining or other special process.PTFE profiled application: ptfe profiled applies to - 190 ºC ~ + 260 ºC temperature, can be used for electrical insulation materials and the lining of contact corrosion medium, bearing slide block, an axle seal and lubrication materials. Widely used in chemical industry, mechanical seal, bridge, electric power, aviation, electronic and electrical fields.
PTFE Polytetrafluoroethylene shaped pieces are made of high quality polytetrafluoroethylene resin moulded into blank materials according to the specifications of the products.
Polytetrafluoroethylene (PTFE/Teflon) is the most widely used and largest variety of fluorine-containing plastics, with excellent comprehensive properties: high and low temperature resistance, corrosion resistance, aging resistance, non-adhesion, high insulation, high lubrication and non-toxic. Widely used in chemical industry, machinery, Bridges, electricity, aviation, electronics and other fields, is one of the most ideal engineering materials in modern industrial civilization.
Polytetrafluoroethylene profile (PTFE/Teflon) : heat resistance: excellent high and low temperature resistance. Generally between 190 ºC ~ 260 ºC can be continuous use, has significant thermal stability, can work under freezing temperature and not brittle, not melt at high temperature
Corrosion resistance: almost free from corrosion by any chemical or solvent. It can protect parts from chemical corrosion of any kind.
Atmospheric aging resistance: long-term exposure to atmospheric surface and performance remain unchanged.
Non-viscous: having the minimum surface tension of a solid material without adhering to any substance.
Insulation: strong dielectric properties (dielectric strength is 10kv/mm).
Lubrication and wear resistance: low friction coefficient. The friction coefficient changes during load sliding, but the value is only between 0.04 and 0.15. It is because of its strong lubricity that it is also outstanding in wear resistance.
Prime Features
> Acid and alkali resistant
> Chemical resistant
> has minimum friction coefficient of all know pure material
> Non-viscous, no aging
> Now molds can be made according to customers requirements.
Property
We supply special compounds filled ptfe products in order meet specific applications requirments according to end use. ie. Glass fiber ,Carbon fiber ,MoS2 ,Graphite , Bronze , Pigmen
Product DescriptionÂ
| Glass Fiber: | Increases compressive strength, rigidity and wear. Reduces creep and cold flow Minimal effect on chemical and electrical properties |
| Carbon: | Increases compressive strength, hardness, wear, and load properties. Good chemical resistance Various types and amounts of carbon can be added to alter conductivity |
| Graphite: | Reduces coefficient of friction Reduces initial wear Increases strength |
| Molybdenum Disulfide: | Increases hardness, stiffness, and wear Minimal effect on chemical and electrical properties |
| Bronze: | Increases hardness and wear resistance Increases dimensional stability and compressive strength Not suitable for corrosive or electrical applications |
| NO | Filled compound and content by weight | Tension strength MPa min | Ultimate strength% min | Compresive strength MPa min |
| 1 | 20%  glass  fiber | 10 | 120 | 16 |
| 2 | 25%  glass  fiber | 10 | 100 | 16 |
| 3 | 20%  glass  fiber     graphile | 10 | 120 | 16 |
| 4 | 60%Â Â bronze | 10 | 80 | 20 |
| 5 | 15%  carbon  fiber | 11 | 130 | 16 |
| 6 | 24%  bronze  12%glass fiber   6% graphite | 9 | 100 | 16 |
| 7 | 15%glass fiber  105polyikmide   5% graphite | 10 | 120 | 16.7 |
Specification
1. Material: PTFE
2. Color: Whtie, or any other
3. Working temperature: -180~260 degree (with/without CF/GF filled)
4. Processing: Machine or by mold
5. Sizes: As requirement
We can produce any special articles, only send us your size and drawing, then we can produce samples for you.
Â
Â
Â
Description
According to customer's requirements or drawings, PTFE special shape articles are made from high qualify PTFE resin, are finished by first molding and then machining or other special process.PTFE profiled application: ptfe profiled applies to - 190 ºC ~ + 260 ºC temperature, can be used for electrical insulation materials and the lining of contact corrosion medium, bearing slide block, an axle seal and lubrication materials. Widely used in chemical industry, mechanical seal, bridge, electric power, aviation, electronic and electrical fields.
PTFE Polytetrafluoroethylene shaped pieces are made of high quality polytetrafluoroethylene resin moulded into blank materials according to the specifications of the products.
Polytetrafluoroethylene (PTFE/Teflon) is the most widely used and largest variety of fluorine-containing plastics, with excellent comprehensive properties: high and low temperature resistance, corrosion resistance, aging resistance, non-adhesion, high insulation, high lubrication and non-toxic. Widely used in chemical industry, machinery, Bridges, electricity, aviation, electronics and other fields, is one of the most ideal engineering materials in modern industrial civilization.
Polytetrafluoroethylene profile (PTFE/Teflon) : heat resistance: excellent high and low temperature resistance. Generally between 190 ºC ~ 260 ºC can be continuous use, has significant thermal stability, can work under freezing temperature and not brittle, not melt at high temperature
Corrosion resistance: almost free from corrosion by any chemical or solvent. It can protect parts from chemical corrosion of any kind.
Atmospheric aging resistance: long-term exposure to atmospheric surface and performance remain unchanged.
Non-viscous: having the minimum surface tension of a solid material without adhering to any substance.
Insulation: strong dielectric properties (dielectric strength is 10kv/mm).
Lubrication and wear resistance: low friction coefficient. The friction coefficient changes during load sliding, but the value is only between 0.04 and 0.15. It is because of its strong lubricity that it is also outstanding in wear resistance.
Prime Features
> Acid and alkali resistant
> Chemical resistant
> has minimum friction coefficient of all know pure material
> Non-viscous, no aging
> Now molds can be made according to customers requirements.
Property
We supply special compounds filled ptfe products in order meet specific applications requirments according to end use. ie. Glass fiber ,Carbon fiber ,MoS2 ,Graphite , Bronze , Pigmen
Product DescriptionÂ
| Glass Fiber: | Increases compressive strength, rigidity and wear. Reduces creep and cold flow Minimal effect on chemical and electrical properties |
| Carbon: | Increases compressive strength, hardness, wear, and load properties. Good chemical resistance Various types and amounts of carbon can be added to alter conductivity |
| Graphite: | Reduces coefficient of friction Reduces initial wear Increases strength |
| Molybdenum Disulfide: | Increases hardness, stiffness, and wear Minimal effect on chemical and electrical properties |
| Bronze: | Increases hardness and wear resistance Increases dimensional stability and compressive strength Not suitable for corrosive or electrical applications |
| NO | Filled compound and content by weight | Tension strength MPa min | Ultimate strength% min | Compresive strength MPa min |
| 1 | 20%  glass  fiber | 10 | 120 | 16 |
| 2 | 25%  glass  fiber | 10 | 100 | 16 |
| 3 | 20%  glass  fiber     graphile | 10 | 120 | 16 |
| 4 | 60%Â Â bronze | 10 | 80 | 20 |
| 5 | 15%  carbon  fiber | 11 | 130 | 16 |
| 6 | 24%  bronze  12%glass fiber   6% graphite | 9 | 100 | 16 |
| 7 | 15%glass fiber  105polyikmide   5% graphite | 10 | 120 | 16.7 |
Specification
1. Material: PTFE
2. Color: Whtie, or any other
3. Working temperature: -180~260 degree (with/without CF/GF filled)
4. Processing: Machine or by mold
5. Sizes: As requirement
We can produce any special articles, only send us your size and drawing, then we can produce samples for you.
Â
Â
Â
Product categories of Pet Chew Machine, pet dog chew food can be made into many kind of shapes such as stick, bone.
We are specialized manufacturers with 15 years of extruder experience, we have the perfect after-sales service and technical support. Look forward to your cooperation!
Dog Chewing Machine,Dog Chewing Food Machine,Pet Chewing Making Machine,Stainless Steel Pet Chews Machine
Jinan Chenyang Technology Co., Ltd. , https://www.cybabyfoodprocessingline.com