Remote Gas Flux Control Valve (WJH0754A)
- Model NO.: WJH0754A
- Material: Thick Copper
- Inside: 35mm
- Trademark: RWD
- Specification: ISO 9001
- HS Code: 84818090
- Media: Gas
- Using Places: Laboratory Hood
- Outside: 55mm
- Transport Package: Standard Export Carton
- Origin: Hengshui, Hebei
1. Thick copper materials, the high brightness epoxy resin coating, anti-corrosive, is heat-resisting, guards against the ultraviolet ray radiation.
2. The valve adopts the helix seals that resisting high pressure, the easy of operation, and the seal is reliable.
3. Switches knobs use the high density PP material quality, conforms to human engineering the design, feel is comfortable.
Hebei Runwangda Making Clean Materials Co., Ltd., founded in 1982, the headquarters covers an area of over 26,000 square meters, has more than 200 employees, is one of the largest domestic laboratory and safety equipment manufacturers with a long history. Focus on the worktop, laboratory faucets, gas valve, fume extractor, pegboard, PP sink, Emergency shower and eye wash series products research &development and production, involving areas such as education, scientific research, pharmaceutical, medical, chemical, petrochemical, electronics, metallurgy, machinery, etc.
Runwangda company has gravity casting, stamping, CNC machining, polishing, electroplating, plastic spraying, laser marking, assembling one-stop production lines, excellent production equipment, strong production strength and the warehouse covers over 2000 m2 for finished goods. Production strictly in accordance with national and international standard, such as the United States ANSI Z358.1-2009 standard, GB18145 standard, management accordance with the international ISO9000 Quality system, using the ERP system to optimize business process, to provide customers with high quality and convenient service.
At present, the die casting industry mainly die casts aluminum alloy, zinc alloy and magnesium alloy, as well as a small amount of copper alloy and other metal die casting parts. Since die-casting uses molds to form, a relatively long mold manufacturing cycle is required in the early stage, and the production efficiency is high after the mold is manufactured. Therefore, for die casting products, it is especially suitable for mass production, with relatively low cost and high efficiency. However, since the die-casting material is a metal material, it is more difficult to demould compared with the plastic material, so a relatively large demolding slope needs to be used, and the shrinkage of the metal itself causes the precision not to be very high. For positions that require precision assembly, subsequent secondary CNC machining is usually required to achieve the accuracy requirements. Die casting parts can be seen everywhere in industries such as automobiles, lighting, machinery, communications, electronics, and home appliances. Some die-casting products as shown below:
Die Casting Products,Die Cating Part,General Die Casging,Zinc Alloy Die Casting Parts,Zinc Alloy Die Casting,Metal Die Casting Products
Shenzhen SCZY Technology Co.,Ltd , https://www.szsczyltd.com