Model NO.: WQD10-12-0.75 6-16-0.75
Power: Electric
Start Up: Electric Pump
Type: Submersible Pump
Application: Submersible Pump, Sewage Pump
Industry: Water Pump
Media: Submersible Pump
Performance: Automatic Pump
Theory: Centrifugal Pump
Impeller: Cast Iron
Wire: Copper,Aluminum
Pump Housing: Cast Iron
Pump Body: Cast Iron
Trademark: FRONTO
Specification: 47*25*25cm
Origin: China
HS Code: 8413709190
APPLICATION AREA:The series pumps are designed as irrigation and drainage equipment with motor and downside pup body.These pumps can be applied to discharge the sewage from building site,coal mine,metallurgy,printing and dyeing enterprise and spinning mill,also applied in irrigation and drainage of clear water.Some ode pumps use fluid channel impeller to raise the anti-jam capacity.Some model pumps are designed according tall-lifting theory to make the pump to keep non-overloading run under the normal working situation.The design extends the using lift-span of motor effectively.Advanced foreign technique were introduced and absorbed in the cutting type series submersible pump.The pumps are designed to cut or manage the long fiber,plastic bag to keep the pump unblocked.
Â
MatericalPump body: Cast iron
Motor housing: Cast iron
Impeller: Cast iron
Motor wire: Copper
Shaft: 45# steel
Â
OPERATING LIMITS:Trans medium PH 4-10
Fluid temperature limit:<40
ºCMax ambient temperature: 40
ºCOperating depth: 5m
Insulation Class:E
Protection Class:IP68
WARRANTY: 1 YEARÂ (according to our general sales conditions)
Main Technical Parameter   Â
Item No |
Voltage |
Frequency |
Power |
HP |
Flow rate |
Head |
Speed |
Outlet |
Float Switch |
(Hz) |
(KW) |
(m³/h) |
(M) |
(R/min) |
(Inch) |
WQD6-12-0.55 |
220V |
50Hz |
0.55 |
0.75 |
6 |
12 |
2860 |
2" |
can add |
WQD6-16-0.75 |
220V |
50Hz |
0.75 |
1 |
6 |
16 |
2860 |
2" |
can add |
WQD10-12-0.75
|
220V |
50Hz |
0.75 |
1 |
10 |
12 |
2860 |
2" |
can add |
WQD7-15-1.1 |
220V |
50Hz |
1.1 |
1.5 |
7 |
15 |
2860 |
2" |
can add |
WQD15-9-1.1 |
220V |
50Hz |
1.1 |
1.5 |
15 |
9 |
2860 |
2" |
can add |
WorkshopÂ
Air Compressor is a general industrial equipment, it is very important for industries. With the help of air compressor, air is compressed and treated by various methods. For Nitrogen Generator and Oxygen Generator, air compressor is used to provide the raw material, the compressed air. There are several kinds of air compressor, piston type, screw type and centrifugal type.
Because nitrogen/Oxygen Generators are designed for non stop operation, Screw Air Compressor is widely used. This screw air compressor provide compressed air with pressure up to 13 bars, good for the operation of nitrogen/oxygen generators.
Gas Compressor specification:
Capacity:1-200 m3/min
Max pressure: 13 bar
Air Compressor
Air Compressor,Screw Air Compressor,Mobile Air Compressor,Durable Air Compressor
Shandong Gamma Gas Engineering Co. Ltd. , http://www.gammagas.com