Squareness Down Pipe Roll Forming Machine

Customized: Customized
Advantage: Use Widely
Condition: New
Color: Blue and Yellow
Trademark: SAIBO
Transport Package: No Packing
Specification: CE SGS
Origin: Jiangsu, China
HS Code: 84552210
1. Profile drawing:Squareness Down Pipe Roll Forming Machine
No Specification of the material
1
 		 Suitable Material Colored Steel plate
2
 		 Width of the raw material About 444mm
3 Thickness 0.4-0.7mm

Machine Detailed Parameters:
1 Machine structure Wall board structure
2 Total power Motor power-4kw
Hydraulic power-5.5kw
3 Roller stations About 20 stations
4 Productivity 0-15m/min
5 Drive system By 1.0 inch single chain
6 Diameter of shaft ¢65mm solid shaft
7
 		 Voltage 380V 50Hz 3phases (Customized)
8
 		 Container need 40GP container

3. The Chart of Process Flow
Squareness Down Pipe Roll Forming Machine
4. Packing & Delivery
  1. Deliver time: take goods after receive deposit 60 days
  2. Packing: suitable of ocean transportation
5. Warranty
  1. Warranty: 1 year warranty from date of shipment
  2. Guarantee:
1: Guaranteed against malfunctions due to manufacturing defects for 1 year after date of shipment. Repairs will be made free of charge.
2: Repairs will not be performed free of change even during the guarantee period in the follow circumstances
-  Damage occurs due to a natural disaster
-  Malfunction occurs due to user error
-  Malfunction occurs due to modifications
-  Malfunction occurs due to further movement or shipment after installation
3:Air ticket, transportation cost, hotel, meals and 100$ per day shall be for purchaser's account if manufacturer's engineer has to be send to purchaser's factory to maintain the machine during the guarantee period.
 
6. Payment Term
   30% deposit by T/T in advance and 70% balance after inspection confirmation before shipment
 
 

Working Principle

Chenwei Series Vibration Polishing Machine has a ring chamber to hold media (abrasive stones) and work pieces.When the machine start working,it makes three-D high frequency vibration.This motion makes the media work on surface of work pieces upward &downward;leftward and rightward;frontward and backward.The process is similar to handwork of surface polishing.

The grinding stones are rolling forward and they are grinding each other during .this makes the work pieces ,polished and clean.

To replace the traditional cloth-wheel polishing, the Vibratory Finishing Machine for Metal Working can save a lot of spending on manpower, and lower the cost of production. It can also be matched up with mass production, improve and stabilize the quality of the products.

The machine structure

Vibratory Polish machine is composed of inertial vibrator, vessel, electrical cabinet and basement.

Inertial vibrator: This is the vibrating source of the machine, it is composed Of vibratory motor, springs and eccentric blocks.

Vessel: The vessel is welded of annular steel plate. It is lined with high quality wearable Polyurethane, to weaken the noise and the bump of workpieces on vessel. (For CWP series, there is a separator on the vessel to seperate the workpieces from the stones. )

Electrical cabinet: Operate the machine by buttons on the control panel.

Basement: It is weld of steel, and it has springs to hold the vessel


Car wheel Polishing Machine


Polishing Machine

Polishing Machine,Car Polishing Machine,Wheel or Polishing Machine,Car Alloy Wheel

XINXIANG CHENWEI MACHINERY CO.,LTD , https://www.sieves.nl