The world's first bicycle city - Copenhagen

The British lifestyle magazine “Monocle” once selected 20 liveable cities in 2008 in the world. Denmark’s Copenhagen is ranked first in terms of environmental protection and other factors. Not only that, Copenhagen was also designated by the International Cycling Federation as the world’s first from 2008 to 2011. A "city of bicycles", bicycles have become a city culture and symbol of Copenhagen. This bicycle-promoting city is not only very similar to Beijing in terms of climate, but also regards bicycles as a means of transportation rather than fashionable sports equipment. At present, 36% of residents in Copenhagen use bicycles, and the city’s goal is to reach 40% in 2012. This can reflect the city’s emphasis on various modes of transportation from the side – bicycles topped, followed by public transport, and private cars at the end.

Standing on the streets of Copenhagen, looking ahead, men and women, old and young, wearing helmets, and rushing in the car, seemed to be like professional athletes, especially at the peak of the commutes, forming a beautiful flowing landscape. Colorful bikes provide a convenient way to travel to ALICE in Copenhagen - learn about the city on two wheels.

At the same time, the use of these bicycles is very cheap, and in addition to paying a deposit of 20 DKK, no additional fees are required. The urban area is nowhere near as far as 110 bicycle sites in Beijing's Copenhagen city, which makes bicycles within easy reach. The ubiquitous repair shops ensure that these bicycles are used optimally every day.

In Copenhagen, there are more than 350 km of bicycle lanes that are separated from roads and sidewalks. There are also 20 km of bicycle lanes that are marked with the car lanes. At intersections, bicycle lanes are generally identified by a blue bar to increase its visibility. If you drive your car in the streets of Copenhagen, you will always be blocked by red lights one after another. On the other hand, if you step on a bicycle and pedal at a constant speed, you can almost always be green and free. This is because in Copenhagen, the frequency of all traffic lights changes is set according to the average speed of the bicycle.

This means that if you start from the green light of an intersection and ride at a constant speed, you will generally not see a red light. Thanks to the promotion of an effective bicycle policy, traffic jams almost disappeared from Copenhagen. It is also convenient to park your bike in Copenhagen. In the city near the subway station, next to the store supermarket, on the school campus, even in front of the government agencies, there is a dedicated bicycle parking lot, and all free of charge; everywhere the design of sophisticated, practical and practical bicycle racks, some wheels Sandwiched between two rings with a diameter of about 30 cm, the handlebars are also framed on a streamlined handlebar frame, which saves space and is not blown by the wind. In the subway and light rail, there is also a dedicated space for passengers to carry bicycles, just buy another bicycle ticket.

Desktop Laser Machine

Desktop laser machine

UTECH Desktop Mini Laser Engraver is equipped with Texas 32 Bit DSP control system, there is a Flash memory on the mother board, you can download the work file to the machine via USB cable.
Mini Laser Engraver is most suitable and the preferred choice of equipments in industries such as advertisement, gifts, shoes, toys, and etc.

Desktop Laser Engraving Machine feature:

1. Adjustable Speed and Power, Smooth and Precise Engraving and Cutting
2. USB Interface
3. Air Assist, Remove heat and combustible gases from the cutting surface.
60W Air pump
4. Embedded Exhaust Fan, Easier intall, Safer transport.
40W exhaust fan, flow can be 5.27m³\Min.
5. Rotary Axis, Engrave any cylindrical object.
6. Aluminum table platform, Leave no chippings on working area.
7. LCD english Panel and DSP control system, easy to operate
8. Water Cooling and Protection System.
The tube will not work without water, to protect laser tube.
9. Advanced Red cross position. easy to identify laser position.
10. Emergency Stop Button.
11. Lift handle on side, easy to lift the machine.
12. Manual or Electircal up down table optional
13. Taiwan Imported Hiwin linear rail transmission
14. Laser focal length: 50.8mm
15. Limit switch on front door & laser tube cover, once open any cover, it will stop work.
16. Machine service life: 1000-1500H for laser tube, 3-5 years for machine body.


Available Industries:
Marble engraving , tombstone carving , stone engraving , advertisements , packing and printing , molding and art craft industries.

Customized model:

UT-1490/1610/1325/1318, etc.


<

Model UT-2030/3050/4060
Laser tube Water cooling Co2 sealed glass
Control system 32 Bit DSP with Flash memory
Drive type Stepper motor
Laser Power 50W/60W
Working Size (mm) 200*300/300*500/400*600
Adjust Table (mm) 200
Max speed 800 mm/s
Image form Plt, Dxf, Bmp, Ai, Dst
Resolution 1000 DPI
Repeatability 0.01 mm
PC Interface USB 3.0 and USB Disk
Power 110~240V/ 50~60Hz
Warranty 12 Months


acrylic laser cutting machine


mini engraving machine

Desktop Laser Machine,Desktop Laser Cutter,Desktop Laser Cutting Machine ,Desktop Laser Engraving Machine

Shandong U-May CNC Technology Co., Ltd. , https://www.sesamecnc.com