Many car owners have attached great importance to the maintenance of cars. Once they find any problems, they will immediately go to the 4S shop for testing. But is this not too tired? Today, we will teach you a good way to detect the brake system, so that you do not have to run 4S shop, you can first detect and solve the problem, it is impossible to go 4S shop maintenance.
First, the brake disc is a disk-like device. When the car is in motion, it is also followed by rotation. It is also used to brake. So wondering if it detects it? As long as the brake disc surface is smooth and smooth from the gap of the rim, if it does not look smooth, it is the need to replace the brake disc;
Second, if you want to replace the brake fluid yourself, you must remember to look at the height of the brake fluid at night and the change in color. The cycle for replacing the brake fluid is different for each type of vehicle. The replacement brake oil cycle of a typical family car is two years or when the mileage reaches 60,000 kilometers. When replacing the brake fluid, be sure to cover the lid. Be careful that the brake fluid is diluted with the water in the air. This may cause the brake to malfunction.
Third, after the car wash, do not pull on the handbrake when the vehicle is stopped for a long time, otherwise it will bring about the shadow of the brake disc surface when the car wash.
The above three good methods for autonomous detection of brake systems can be referenced and implemented. Of course, this is also the case under skilled circumstances, if it is a novice advice or problems, go to the 4S shop to see, so as not to take it for granted and cause some failure can not be ruled out in a timely manner to lead to trouble.
Textruded Acrylic Sheet
Textruded Acrylic Sheet,Patterned Acrylic Sheets,Clear Textured Unbreakable-glass Sheets,Reeded Acrylic Sheet
Jiangmen Kunxin new Material Technology Co.,Ltd , https://www.plasticsjmkunxin.com