Vane Damper Shell Molding Machine, Fire Damper Roll Forming Machine

Model NO.: Bosj
Control System: PLC
Material of Roller: Gcr 15A
Operation Type: Auto
Advantage: Use Widely
HS Code: 8455212000, 845521200
Power: About 34
Drive Type: Gear Box
Production Speed: 6-8m/Min
Size of Production: Reference The Picture
Material: Mild Steel Galvanized Sheet
Trademark: BOSJ
Transport Package: Nude
Specification: 28X4X3.9
Origin: Jiangsu, China
Model NO.: Bosj
Control System: PLC
Material of Roller: Gcr 15A
Operation Type: Auto
Advantage: Use Widely
HS Code: 8455212000, 845521200
Power: About 34
Drive Type: Gear Box
Production Speed: 6-8m/Min
Size of Production: Reference The Picture
Material: Mild Steel Galvanized Sheet
Trademark: BOSJ
Transport Package: Nude
Specification: 28X4X3.9
Origin: Jiangsu, China

 

Galvanized Fire Shutter Louver Blade Roll Forming Equipment

1, Forming process
De-coiler- Servo feeding- Gap and cut off mould- Forming ---collection table

2, Flow diagram
Volume Control Damper Shell Fire Damper Roll Forming Machine Saudi Arabia
3, Equipment composing parts
Equipment is composed of de-coiler, feed system, gap and cut off, forming machine, collection table, electric control system, etc.
Volume Control Damper Shell Fire Damper Roll Forming Machine Saudi Arabia
4, Technical parameter of equipment main parts
1, Auto-decoiler
A, Load capacity: 2 T
B, Inner diameter of coil: 490-510mm
Outer diameter≤ 1200mm
2. Servo feed and punching unfilled corner parts
A, Servo motor: Used Mitsubishi Servo motor, power: 1.0kw
B, Punching unfilled corner die: 4 pillars punching die
C, Material of punching die: Cr12. Quenching treatment
2, Feeding: Power 0.37kw
3, Forming machine
A, Forming frame
B, Material of forming mould: GCr15, quenching treatment: Rigidity: HRC56-62º
C, Motor: 7.5kw frequency conversion engine
4, Electric control: PLC system
Volume Control Damper Shell Fire Damper Roll Forming Machine Saudi Arabia

NO.
Project
Unit
parameters
Remark

1
Material		 type   Mild steel Galvanized sheet  
Strength of material sheet Map ≥350  
Thickness of material sheet mm 0.8~1.5  
2 Size of production
 		 mm       
Reference the picture		  
3 Production speed m/min 6~8  
4 Material of roller   GCr quenching treatment
 		  
5 Drive type   Gear box  
6 Power kw About 34  
7 Electric control system   PLC variable frequency control  
8 Dimensions(Length*width*height)

 		 m 28X4X3.9  

 

Galvanized Fire Shutter Louver Blade Roll Forming Equipment

1, Forming process
De-coiler- Servo feeding- Gap and cut off mould- Forming ---collection table

2, Flow diagram
Volume Control Damper Shell Fire Damper Roll Forming Machine Saudi Arabia
3, Equipment composing parts
Equipment is composed of de-coiler, feed system, gap and cut off, forming machine, collection table, electric control system, etc.
Volume Control Damper Shell Fire Damper Roll Forming Machine Saudi Arabia
4, Technical parameter of equipment main parts
1, Auto-decoiler
A, Load capacity: 2 T
B, Inner diameter of coil: 490-510mm
Outer diameter≤ 1200mm
2. Servo feed and punching unfilled corner parts
A, Servo motor: Used Mitsubishi Servo motor, power: 1.0kw
B, Punching unfilled corner die: 4 pillars punching die
C, Material of punching die: Cr12. Quenching treatment
2, Feeding: Power 0.37kw
3, Forming machine
A, Forming frame
B, Material of forming mould: GCr15, quenching treatment: Rigidity: HRC56-62º
C, Motor: 7.5kw frequency conversion engine
4, Electric control: PLC system
Volume Control Damper Shell Fire Damper Roll Forming Machine Saudi Arabia

NO.
Project
Unit
parameters
Remark

1
Material		 type   Mild steel Galvanized sheet  
Strength of material sheet Map ≥350  
Thickness of material sheet mm 0.8~1.5  
2 Size of production
 		 mm       
Reference the picture		  
3 Production speed m/min 6~8  
4 Material of roller   GCr quenching treatment
 		  
5 Drive type   Gear box  
6 Power kw About 34  
7 Electric control system   PLC variable frequency control  
8 Dimensions(Length*width*height)

 		 m 28X4X3.9  

Tungsten Carbide Planer Knives

Our blade part is brazed tungsten carbide, the finished blade part size can ensure 10x1mm, The material is high hardness (HRA88~90) and virginal fine particles of tungsten carbide. Our factory accumulate rich experince for welding, the finished product is seamless, without overflowing, relieving of internal stress, then processed with precise grinding machine. They are good working for a variety of hard woods. With the features of good red hardness, less than 400mm length Wood Planer Knives edge straightness error < 0.05mm. Besides, they are strong resistance to abrasion, sharp blade, smooth planed surface, no distortion and no crack.

Tungsten Carbide Planer Knives,Tungsten Carbide Planer Blades,Tungsten Planer Blades,Tungsten Carbide Planer Knife

SICHUAN TELOS NEW MATERIAL TECHNOLOGY CO., LTD , https://www.telosmaterial.com