Wholesale Stainless Steel Water Pump Single Screw Pump (ACE-LGB-10)

Wholesale Stainless Steel Water Pump Single Screw Pump (ACE-LGB-10)

ACE Brand G Series Screw Lotion Pump
Handling various medium without solid.

Viscosity: 1-1500mm2/s, the viscosity can reach up to 3x106mm2/s when reduced the speed.

Pressure range:4.0MPa

Capacity range:1-2000m3/h
 
Temperature range: -15ºC--280ºC.



G type mono screw pump sewage pumps progressive cavity pump belongs to the rotor type positive displacement pump, it is depend on the screw meshing with liner on the discharge and suction cavity to conveying liquid volume change.It is a kind of method of pressurized screw pump, a main working parts by bushing has a double helix cavity (stator) and the stator cavity and its meshing singlehead screw screw (rotor).When the input shaft through the universal joint drive making planets revolving around the center of the stator, rotor stator, rotor, vice is continuous mesh form sealed cavity, the seal chamber volume invariably uniform axial movement, the medium from the suction end of deputy to the stator, rotor pressure side, the suction medium sealed cavity through the stator without stirring and destruction.

Using Range Profile:
 
 1.Engineering: Sewage delivery, dewatering slud1. petroleum-industry: Thickened oil delivery,oil and gas mised delivery, polymer delivery.

2. Chemical and Pharmacy: Paste matters, lactescence, suspension, liquid contains gas and solid.

3. Environmege delivery, measuring input of flocculnt and chemical preparation, oil and water separate and waste gas desulfurization.

4. Mineral Products Engineering: Water gas equipment and delivery, production equipment of titanium white/ kaolin/ hydraulic, feeding to spiral-flow and filter, chemical input, charging and grouting, electrolyte treatment.

5.Food Industry: Dairy products, juice/puree/ condiment, beer.

6.Paper making: Raw material equipment, process of coating/ tinting, chemical measuring, slag/ waste water treatment.
 
7.Screw Lotion Pump

 
Screw Lotion Pump is also named colloid pump, three-lobe pump, sole pump, etc. 
When the 2 simultaneous reverse rotating rotors revolve, it produces suction force at the inlet (vacuum), which intakes the material delivered.

Rotary lobe pumps can handle slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure, too, so output is relatively constant and continuous.

 










  Wholesale Stainless Steel Water Pump Single Screw Pump (ACE-LGB-10)

ACE Brand G Series Screw Lotion Pump
Handling various medium without solid.

Viscosity: 1-1500mm2/s, the viscosity can reach up to 3x106mm2/s when reduced the speed.

Pressure range:4.0MPa

Capacity range:1-2000m3/h
 
Temperature range: -15ºC--280ºC.



G type mono screw pump sewage pumps progressive cavity pump belongs to the rotor type positive displacement pump, it is depend on the screw meshing with liner on the discharge and suction cavity to conveying liquid volume change.It is a kind of method of pressurized screw pump, a main working parts by bushing has a double helix cavity (stator) and the stator cavity and its meshing singlehead screw screw (rotor).When the input shaft through the universal joint drive making planets revolving around the center of the stator, rotor stator, rotor, vice is continuous mesh form sealed cavity, the seal chamber volume invariably uniform axial movement, the medium from the suction end of deputy to the stator, rotor pressure side, the suction medium sealed cavity through the stator without stirring and destruction.

Using Range Profile:
 
 1.Engineering: Sewage delivery, dewatering slud1. petroleum-industry: Thickened oil delivery,oil and gas mised delivery, polymer delivery.

2. Chemical and Pharmacy: Paste matters, lactescence, suspension, liquid contains gas and solid.

3. Environmege delivery, measuring input of flocculnt and chemical preparation, oil and water separate and waste gas desulfurization.

4. Mineral Products Engineering: Water gas equipment and delivery, production equipment of titanium white/ kaolin/ hydraulic, feeding to spiral-flow and filter, chemical input, charging and grouting, electrolyte treatment.

5.Food Industry: Dairy products, juice/puree/ condiment, beer.

6.Paper making: Raw material equipment, process of coating/ tinting, chemical measuring, slag/ waste water treatment.
 
7.Screw Lotion Pump

 
Screw Lotion Pump is also named colloid pump, three-lobe pump, sole pump, etc. 
When the 2 simultaneous reverse rotating rotors revolve, it produces suction force at the inlet (vacuum), which intakes the material delivered.

Rotary lobe pumps can handle slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure, too, so output is relatively constant and continuous.

 










 

Metal 3D Printing - Slm / Dmls

METAL 3D Printing - SLM / DMLS
The two technologies have many similarities: both use laser scanning and selectively fuse (or melt) metal powder particles, glue them together and build them layer by layer. Similarly, the materials used in both processes are granular metals.
The difference between SLM and DMLS is due to the basis (and patents) of the particle bonding process: SLM uses metal powder with a single melting temperature and completely melts the particles, while in DMLS, the powder is composed of materials with variable melting points at high temperatures Fusion at the molecular level.
Bering 3D provides 3D printing services for various metal materials such as stainless steel, die steel, titanium alloy, aluminum alloy, and bronze.

Metal 3D Printing - Slm / Dmls,3d Printing Service Metal ,Metal 3d Printing Service Stainless Steel,3d Printing Service Metal Aluminum

Ningbo Rongna Technology Co.,Ltd , https://www.machiningcustom.com