Wire Rod, Rebar, Round Bar, Strip Making Machine

High speed wire rod finishing mill made in China
1.Function of steel rolling mill(finishing mill group)
The finishing mill group is composed of top crossed 45° High-speed wire-rod finishing mills.
The finishing mill group is located in high-speed wire-rod workshop. Through 10 unit rack the continuous micro-tension rolling mill will be transported upstream Æ 17 ~ Æ 21mm of rolling, rolling become Æ 5.5 ~ Æ 16mm finished wire. The working speed of 90m/s is insured. The specification of end product is Æ 5.5mm.









2. Parameters
3. Equipment performance
The form of mill:      Cantilever roller loop mill
The quantity of frame: ten (first~third frames are Æ200 mill,fourth~tenth frames are Æ150mill)
Design method:     top crossed 45°, ten frames concentrated transmission.
Size of roll loop:  Æ200 mill:(Æ210.5--Æ189.5)×Æ120.65×72mm
Æ150 mill:(Æ158.8-Æ142.9)×Æ87.76×62mm
Rolling  force:     Æ200 mill:152kN
Æ150mill:107.8kN
Rolling  torque:   Æ200 mill:2.86kNm
Æ150 mill:1.61kNm
Transmission motor:  DC motor
                  Power: 1600kW×three or 4500 kW AC inverter motor
                   Rotating speed: 1000~1300 r/min
                   Working speed: 900~1100r/min

Lubrication of the group:  dilute oil concentration lubricated
System oil pressure: 0.35~0.6MPa
Consumption: 1500L/min
Oil: Mobil 525
Cleanliness: 10m
Cooling water of roll shaft
water pressure: 0.6MPa
Consumption: maximum is 10´30m3/hHydraulic pressure system of protective cover:
Working pressure: 20MPa
System flow:  35 l/min Composition of machine: Æ200 mills(three),Æ150mills(seven), guild fittings, speed increasing box, support base, flap, waterproof slot, buffer tank, the protective cover, couplings and pipework of finishing mill.




  High speed wire rod finishing mill made in China
1.Function of steel rolling mill(finishing mill group)
The finishing mill group is composed of top crossed 45° High-speed wire-rod finishing mills.
The finishing mill group is located in high-speed wire-rod workshop. Through 10 unit rack the continuous micro-tension rolling mill will be transported upstream Æ 17 ~ Æ 21mm of rolling, rolling become Æ 5.5 ~ Æ 16mm finished wire. The working speed of 90m/s is insured. The specification of end product is Æ 5.5mm.









2. Parameters
3. Equipment performance
The form of mill:      Cantilever roller loop mill
The quantity of frame: ten (first~third frames are Æ200 mill,fourth~tenth frames are Æ150mill)
Design method:     top crossed 45°, ten frames concentrated transmission.
Size of roll loop:  Æ200 mill:(Æ210.5--Æ189.5)×Æ120.65×72mm
Æ150 mill:(Æ158.8-Æ142.9)×Æ87.76×62mm
Rolling  force:     Æ200 mill:152kN
Æ150mill:107.8kN
Rolling  torque:   Æ200 mill:2.86kNm
Æ150 mill:1.61kNm
Transmission motor:  DC motor
                  Power: 1600kW×three or 4500 kW AC inverter motor
                   Rotating speed: 1000~1300 r/min
                   Working speed: 900~1100r/min

Lubrication of the group:  dilute oil concentration lubricated
System oil pressure: 0.35~0.6MPa
Consumption: 1500L/min
Oil: Mobil 525
Cleanliness: 10m
Cooling water of roll shaft
water pressure: 0.6MPa
Consumption: maximum is 10´30m3/hHydraulic pressure system of protective cover:
Working pressure: 20MPa
System flow:  35 l/min Composition of machine: Æ200 mills(three),Æ150mills(seven), guild fittings, speed increasing box, support base, flap, waterproof slot, buffer tank, the protective cover, couplings and pipework of finishing mill.




 

Excavator Rotary Screen Bucket

Excavator rotary screen bucket

Jining Xingchuang Machinery Manufacturing Co., Ltd. , https://www.xcexcavatoraccessories.com