Wreck Ship Salvage Airbag

Model NO.: XCNo. 17
HS Code: 40169500
Marine airbag technology for upgrading and launching is a technical method that a ship finishes upgrading and launching through an airbag. The ship launches by the technology as follows: To inflate hoisting airbag and properly move the ship under the traction of winch and wire rope to finish launching. When the ship goes up, rolling airbag should be used firstly, and after positioning, the airbag is hoisted to cushion. The fundamental principle of ship launching and upgrading is to inflate the airbag under low pressure and bear in large area.

Standard specifications of xincheng Ship Launching Airbags
Diameter (D): From 0.8m to 2.0m.
Effective Length (EL): From 6m to 18m.
Total Length (TL): From 7m to 19.5m
The above specification only is our standard specification arrange. Other specification of ship launching airbags also available upon clients' request.

Application:
1. Shipwreck salvage.
2. Floating bridge and dock construction.
3. Rescue and remove of wrecked ship.
4. Can be used as pontoons for supporting docks and other floating structure.

We are a manufacture of airbag, the raw material also manufactured by ourselves, the best quality at the reasonable price. In addition, We promise that the product can be returned due to quality problem within one year; And we provide maintenance technology for free and the required raw material
                                                   This marine air bag catalog
D*L Initial pressure(Po) is 0.05Mpa Test pressure Initial pressure(Po) is 0.08Mpa Test pressure
      Mpa       Mpa
Weigh R(KN) E(KJ)   Weigh R(KN) E(KJ)  
0.5*1.0 24 64 6 0.15 27 86 8 0.18
0.6*1.2 35 86 10 0.15 39 124 16 0.18
0.7*1.5 50 136 17 0.15 55 180 24 0.18
1.0*1.5 80 181 32 0.15 88 238 45 0.18
1.0*2.0 100 256 45 0.15 110 338 63 0.18
1.2*2.0 120 296 62 0.15 120 389 88 0.18
1.35*2.5 170 426 100 0.15 183 560 141 0.18
1.5*3.0 320 578 152 0.15 355 760 214 0.18
1.7*3.0 400 637 190 0.15 440 840 268 0.18
2.0*3.5 590 875 306 0.15 650 1150 430 0.18
2.5*4.0 1050 1378 660 0.15 1150 1815 925 0.2
2.5*5.5 1350 2010 932 0.118 1480 2650 1315 0.2
3.0*5.0 1880 2100 1070 0.18 2060 2520 1360 0.25
3.0*6.0 2180 2530 1360 0.18 2400 3210 1670 0.25
3.3*4.5 2020 1880 1170 0.18 2220 2470 1640 0.25
3.3*6.5 2700 3010 1810 0.18 2960 3960 2530 0.25
Note: The weight of the ball by ball weight (without jacket), the weight of error of ± 10%; reaction force error of ± 10% 

MF 660 parts are from MF660 tractor which is a heavy tactor. MF660 parts which we are suppling all the gears, shafts, axle parts, synchronizers gear sets in this heavy tractor. We also supply other parts like differential, axle, Synchronizers in Gearbox , shaft in gearbox, differential, axle and other parts. We are the OE factory of these parts. Some of the pictures as below:

Kit Gear tractor gear

Pump gear Tractor parts


Ring gear Tractor gearRing gear Tractor gear

MF660 Series

Mf660 Gears,Planetary Gear,Mf660 Shafts

Qijiang Yongyue Gear Co.Ltd , http://www.yongyuegear.com