Fuel Pump Dispenser ESS452 for Citroen/FIAT (CRP3701)

• Model NO.: CRP3701
• Type: Fuel Injection Pump

• Flow Rate: Variable Pump

Specifications

1. INTERNAL GASOLINE FUEL PUMP
2. 90LPH @ 3BAR
3. WALBRO: ESS290, ESS452, 5CA302
MARELLI: MSS 071- 21.77507.150.00

Internal Petrol Fuel Pump Electrical Walbro ESS290 for DAEWOO / CITROEN / FIAT / LANCIA  

 

Product Details:

 

Interchange:

Airtex: E10222,E10223, E10224,E10225

FIAT:46427664; 7769932

Lancia:46427664

Daewoo:AM-09-ST

Hyundai:31111-33000

Walbro:ESS290;ESS452, 5CA302
Ford: F4329A407A

 

Application:

    DAEWOO / CITROEN / FIAT / LANCIA
 

Main Market:    

South America,North America,Western Europe,South-East Asia,etc..

 

Packing Details :

One fuel pump is put into a nice colorful box and with a certain quantity fuel pump into a carton. the box details as below picture showed.

 

Shipping Terms:

In 30days after get your payment.

 

Payment Terms:

1. T/T

2. Western Union

3. Paypal

4. Credit Card Available

5. L/C (Letter of Credit)

6. O/A(open account trade)

7. D/P (Documents against Payment)

8. D/A(Documents against Acceptance)
 

Returns and Warranty: 

Our customer's satisfaction is our main concern.

1. ONE year warranty be offered.

You have the right to return the good within 1 year, we will replace any defective part with a new one or refund the complete amount within one week. 

2. 100% ensure that each fuel pump be tested before shipping out. 

WELCOME TO INQUIRY US FOR MORE DETAILS!!!

 

More for reference:

  

Credit Parts is the leading manufacturer of  fuel pump to worldwide market, professionally make many high performance and low pressure fuel pumps

fuel pump GSS342, GSS341, GSS340, 0580254044,0580254910, 23220-21132, ERJ415, 0580453477, 0580453471 etc.

 

ESS290 AS BELOW:

"Gravity Die Casting. A permanent mould casting process, where the molten metal is poured from a vessle of ladle into the mould, and cavity fills with no force other than gravity, in a similar manner to the production of sand castings, although filling cn be controlled by tilting the die."

Gravity Die Casting

Sometimes referred to as Permanent Mould, GDC is a repeatable casting process used for non-ferrous alloy parts, typically aluminium, Zinc and Copper Base alloys.

The process differs from HPDC in that Gravity- rather than high pressure- is used to fill the mould with the liquid alloy.

GDC is suited to medium to high volumes products and typically parts are of a heavier sections than HPDC, but thinner sections than sand casting.

There are three key stages in the process.

1. The heated mould [Die or Tool] is coated with a die release agent. The release agent spray also has a secondary function in that it aids cooling of the mould face after the previous part has been removed from the die.
2. Molten metal is poured into channels in the tool to allow the material to fill all the extremities of the mould cavity. The metal is either hand poured using steel ladles or dosed using mechanical methods. Typically, there is a mould [down sprue" that allows the alloy to enter the mould cavity from the lower part of the die, reducing the formation of turbulence and subsequent porosity and inclusions in the finished part.
3. Once the part has cooled sufficiently, the die is opened, either manually or utilising mechanical methods.

Advantages

• Good dimensional accuracy
• Smoother cast surface finish than sand casting
• Improved mechanical properties compared to sand casting
• Thinner walls can be cast compared to sand casting
• Reverse draft internal pockets and forms can be cast in using preformed sand core inserts
• Steel pins and inserts can be cast in to the part
• Faster production times compared to other processes.
• Once the tolling is proven, the product quality is very repeatable.
• Outsourced Tooling setup costs can be lower than sand casting.

Gravity Casting Parts

Gravity Casting Parts,Aluminum Alloy Gravity Casting Parts,Aluminum Gravity Die Casting Parts,Gravity Casting Aluminum Parts

HSI INDUSTRIEL LTD , https://www.hsiindustriel.com