High Efficiency Aluminium Radiator Nipple Machine From China
Model NO.: DSJ-01
Machine 2: Automatic Hydraulic Gauge Lathe
Main Driving Motor Power2: 1.5kw
Working Speed: 6-10 PCS/Min
Machine Weight 2: About 650kg
Trademark: ZHENHUAN
Transport Package: Wooden Case
Specification: GB
Origin: Zhejiang
Model NO.: DSJ-01
Machine 2: Automatic Hydraulic Gauge Lathe
Main Driving Motor Power2: 1.5kw
Working Speed: 6-10 PCS/Min
Machine Weight 2: About 650kg
Trademark: ZHENHUAN
Transport Package: Wooden Case
Specification: GB
Origin: Zhejiang
Full Automatic Tube Cutting Machine
I Description of the machine
This machine is used for cutting steel tubes with chamfering single side (both interior and exterior angle) and
slotting function.
II Main technical data
| Item | Data |
| Machine code | HY40-100 |
| Suitable steel tube diameter | Φ10-40mm |
| Output | 35pcs/min (Φ40.3mm) |
| Cut-to-length precision | Less than 0.05mm |
| Spindle speed | 930, 1050, 1270, 1420 rpm |
| Main driving motor power | 3kW |
| Servo feeding motor & driver | Delta from Taiwan |
| Compressed air source | 0.6MPa |
| Air flow | 0.35m3/min |
| Machine dimension | 1120 x 800 x 1380mm |
| Machine weight | 850kg |
| Voltage | 380V, 3Phase, 50Hz. |
| Video link | https://youtu.be/sjs_H77I0HA |
Automatic Hydraulic Gauge Lathe
I Description of the machine
This machine is special for chamfering single side, slotting and so on.
IIMain technical data
| Item | Data |
| Main driving motor power | 2.2kW |
| Main spindle speed | 100-3000 rpm |
| Suitable max. diameter of tube | 35mm |
| Output | 8-11 pcs/min |
| Electric supply | 380VAC, 3phase, 50Hz |
| Control method | PLC |
| Driving method | Hydraulic |
| Working range | Circular, hexagon, square |
| Feeding method | Vibrating disk |
| Feeding power source | Compressed air |
| Machine dimension | About 1400 x 1200 x 1500mm |
| Machine weight | About 650kg |
| Voltage | 380V, 3Phase, 50Hz. |
| Video link | https://youtu.be/uiV_i-nLBNM |
Automatic Hydraulic denting Machine
I Description of the machine
This machine is used for denting steel tubes.
II Main technical data
| Item | Data |
| Machine code | JSG-100 |
| Max. hydraulic pressure | 10MPa |
| Suitable Max. steel tube diameter | 35mm |
| Output | 15pcs/min |
| Hydraulic feed speed | adjustable |
| Total power | 2.2kW |
| Weight of machine | 600kg |
| Voltage | 380V, 3Phase, 50Hz. |
| Video link | https://youtu.be/9k_gkE5fmXM |
Automatic Thread Rolling Machine
I Description
This machine is used for thread rolling aluminum radiator nipples automatically,
with automatic vibrating disk feeding device, high working efficiency.
II Main technical data
| Item | Data |
| Machine code | JSG-3T-50 |
| Max. hydraulic pressure | 3MPa |
| Suitable steel tube diameter | 22-42mm |
| Suitable steel tube length | 8-40mm |
| Output | 15pcs/min |
| Suitable thread pitch | 0.5-3mm |
| Hole diameter of thread rolling die | 35mm |
| Height of thread rolling die | 40mm |
| Total power | 8kW |
| Weight of machine | 1300kg |
| Voltage | 380V, 3Phase, 50Hz. |
| Video link | https://youtu.be/z9Bkj7LfEqo |
Â
| Â | Â |
| Â | Â |
| Â | Â |
| Â | Â |
| Â | Â |
| Â | Â |
| Â | Â |
| Â | Â |
| Â | Â |
| Â | Â |
| Â | Â |
Full Automatic Tube Cutting Machine
I Description of the machine
This machine is used for cutting steel tubes with chamfering single side (both interior and exterior angle) and
slotting function.
II Main technical data
| Item | Data |
| Machine code | HY40-100 |
| Suitable steel tube diameter | Φ10-40mm |
| Output | 35pcs/min (Φ40.3mm) |
| Cut-to-length precision | Less than 0.05mm |
| Spindle speed | 930, 1050, 1270, 1420 rpm |
| Main driving motor power | 3kW |
| Servo feeding motor & driver | Delta from Taiwan |
| Compressed air source | 0.6MPa |
| Air flow | 0.35m3/min |
| Machine dimension | 1120 x 800 x 1380mm |
| Machine weight | 850kg |
| Voltage | 380V, 3Phase, 50Hz. |
| Video link | https://youtu.be/sjs_H77I0HA |
Automatic Hydraulic Gauge Lathe
I Description of the machine
This machine is special for chamfering single side, slotting and so on.
IIMain technical data
| Item | Data |
| Main driving motor power | 2.2kW |
| Main spindle speed | 100-3000 rpm |
| Suitable max. diameter of tube | 35mm |
| Output | 8-11 pcs/min |
| Electric supply | 380VAC, 3phase, 50Hz |
| Control method | PLC |
| Driving method | Hydraulic |
| Working range | Circular, hexagon, square |
| Feeding method | Vibrating disk |
| Feeding power source | Compressed air |
| Machine dimension | About 1400 x 1200 x 1500mm |
| Machine weight | About 650kg |
| Voltage | 380V, 3Phase, 50Hz. |
| Video link | https://youtu.be/uiV_i-nLBNM |
Automatic Hydraulic denting Machine
I Description of the machine
This machine is used for denting steel tubes.
II Main technical data
| Item | Data |
| Machine code | JSG-100 |
| Max. hydraulic pressure | 10MPa |
| Suitable Max. steel tube diameter | 35mm |
| Output | 15pcs/min |
| Hydraulic feed speed | adjustable |
| Total power | 2.2kW |
| Weight of machine | 600kg |
| Voltage | 380V, 3Phase, 50Hz. |
| Video link | https://youtu.be/9k_gkE5fmXM |
Automatic Thread Rolling Machine
I Description
This machine is used for thread rolling aluminum radiator nipples automatically,
with automatic vibrating disk feeding device, high working efficiency.
II Main technical data
| Item | Data |
| Machine code | JSG-3T-50 |
| Max. hydraulic pressure | 3MPa |
| Suitable steel tube diameter | 22-42mm |
| Suitable steel tube length | 8-40mm |
| Output | 15pcs/min |
| Suitable thread pitch | 0.5-3mm |
| Hole diameter of thread rolling die | 35mm |
| Height of thread rolling die | 40mm |
| Total power | 8kW |
| Weight of machine | 1300kg |
| Voltage | L-Spreader Using a grinding tool with high precision in combination with an ergonomic design, the efficient sterile L-Spreader specialized for Asian scientific researchers is developed and manufactured to effectively solve problems such as contamination or uneven application of spread plate in bio-labs, which helps to make domestic biological testing practitioners more efficient and simplify their tedious work during biological experiments. Feature:
1.Sterile L-Spreader, using medical PS.
2.Sterilized by E-beam, SAL=10^-6.
3.Smooth and flat surface that solves problems such as contamination or uneven application of spread plate in bio-labs; Length of handle: 144mm, diagram of spreading: 33mm, suitable for 3.5cm, 6cm, 9cm, 10cm Petri Dishes and etc. Ideal for spreading cells or bacteria evenly in the culture dish.
Innoculating Needles / Loops Features:
1. PP material, hydrophilic.
2. Used in Microbiology experiments.
3. Different colors for identification.
4. Flexible handles for easier collection and inoculation.
5. Sterilized by Ethylene Oxide.
6. Easy-tear sterile individual packaging.
Inoculating Needles And Loops,Inoculating Needles,Inoculating Loops,Inoculating Wire Loop Wuxi NEST Biotechnology Co.,Ltd , https://www.nest-biotech.com |