Who will be the third largest power source in China after coal-fired power and hydropower? Recently, the National Bureau of Statistics released the main data of industrial production above designated size in 2016. Data show that in 2016, the power generation reached 591.11 billion kWh. Among them, nuclear power generation was 212.7 billion kWh, an increase of 24.1% year-on-year, and wind power generation was 211.3 billion kWh, an increase of 19% year-on-year. From this statistical data, China's nuclear power generation has been comparable to wind power, and it is expected to become the third largest power source in China.
At present, high-voltage cable fault testers have different calibers for 2016 statistics of wind power and nuclear power generation. According to the data from the National Energy Administration, wind power generation reached 241 billion kWh in 2016, and the installed capacity of wind power was 19.3 million kilowatts in the same period, and cumulative installed capacity reached 149 million kilowatts. The number of wind utilization hours is 1,742 hours. It is worth noting that the amount of wind power generated by the National Energy Administration refers to the amount of electricity on the grid.
According to the nuclear power generation data released by the China Nuclear Energy Association, the cumulative power generation of high-voltage cable fault testers in 2016 was 210.519 billion kWh, a year-on-year increase of 25.07%. Among them, 19.659 billion kwh electricity was used on the Internet.
The amount of wind power generated by the National Bureau of Statistics is the production data of industries above designated size, and the statistical scope is that of enterprises with an annual main business income of more than 20 million yuan. Therefore, some wind farms with lower main income may not have been calculated, leading to low values.
Based on the above data, the current nuclear power generation may not exceed wind power generation, but the growth rate of nuclear power generation in 2016 is much higher than that of wind power, and the gap between nuclear power and wind power generation has narrowed obviously.
It is understood that wind power generation in China exceeded nuclear power for the first time in 2013. The amount of wind power generated during the year was 140 billion kilowatt-hours and nuclear power generation was 1080 billion kwh. This is mainly due to the fact that since the nuclear accident in Fukushima in Japan in 2011, China’s new nuclear power plants have experienced a temporary stagnation and the growth of power generation has also slowed down.
In recent years, the steady growth of nuclear power generation, high-voltage cable fault tester benefited from the stable operation of nuclear power plant installed. In 2016, a total of 7 nuclear power plants were put into operation in China. China Nuclear Energy Association statistics show that as of December 31, 2016, China has put into commercial operation of a total of 35 nuclear power units, with an installed capacity of 33.632 million kilowatts. At the same time, China’s nuclear power utilization hours were as high as 7042 hours, much higher than other power sources.
According to the “13th Five-Year Plan for Power Developmentâ€, by 2020, China’s nuclear power capacity will reach 58 million kilowatts, and wind power capacity will reach 210 million kilowatts. Compared with the data at the end of 2016, nuclear power installed capacity will increase by 72.5%, and wind power capacity will increase by 41%. Obviously, in the next four years, the increase in the installed capacity of nuclear power will be significantly higher than that of wind power. Calculated according to this ratio, in the case of no significant increase in the number of hours of wind power utilization, nuclear power generation exceeds wind power, becoming the third largest power source in China is a high probability event.
2 Ton Electric Counterbalance Forklift
Zowell 2 ton counterbalanced forklift is a storage equipment with a large counterweight to offset the weight lifted by the forklift. As one of the most widely used forklift, this forklift can easily overcome the weight of goods.
The counter balanced forklift equipped with pneumatic tire to ensure operation
speed and gradeability. It is widely used in loading, unloading, stacking and
transporting finished goods in ports, stations and factory. Counterweight
forklift within 3 tons can also operate in cabins, train compartments and
containers.
Equipment detail of electric
4 wheel counterbalance forklift trucks
Comply with international safety
standards,proving more protection.
Humanized design on rear-position
multi-valve and bias layout of instrument panel, makes operation more safe.
Maximum driving speed is 15KM/H and maximum
gradeability is 15%. With optional engine and transmission,the maximum speed
can be up to 20km/h and gradeability can be 15%.
With ultra-low torque steering system, the
steering operation is more stable and reliable.
Strong half-closed-frame design makes the
chassis more strong and easy to keep maintenance.
One-piece upper cover prevents the forklift
from dust and rainwater and it avoids the electrical components problem and
safety problem on the forklift.
Full range of customized attachment choices
such as side shift, fork positioner, bale clamp, stabilizers, full closed cabin
and heater etc
electric forklift truck,counterbalanced forklift,Rough terrain forklift,counter-balanced forklift
Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.xianfengforklifts.com