Rto. 300 Roots Pumps for Vacuum Coating Machine
RTO. 300 roots pumps for vacuum coating machine
Product Description
| PUMP MODEL | RTO.300SÂ RTO/W.300S |
RTO.600SÂ RTO/W.600S |
RTO.1200S RTO/W.1200S |
RTO.2500F | |
| Nominal Pumping Speed, L/s | 300 | 600 | 1200 | 2500 | |
| Ultimate Pressure | Partial,Pa | 0.06 | 0.06 | 0.06 | 0.06 |
| Total,Pa | 0.6 | 0.6 | 0.6 | 0.6 | |
| Protecting Pressure Differential,Pa |
4300 | 4300 | 2700 | 2700 | |
| Maximum Zero-flow Compressing Ratio |
40 | 45 | 50 | 55 | |
| Motor Power,KW | 3 | 5.5 | 7.5 | 18.5 | |
| Synchronized-rotating Speed,rpm | 3000 | 3000 | 3000 | 3000 | |
| Inlet,mm | 160 | 200 | 250 | 250 | |
| Outlet,mm | 100 | 160 | 200 | 200 | |
| Noise Level,dB(A) | 80 | 82 | 84 | 86 | |
| Temperature Rising,K |
RTO | ≤26 | ≤26 | ≤26 | ≤26 |
| RTO/W | ≤52 | ≤52 | ≤52 | - | |
| Cooling Mode | RTO | Inner Watercooling |
Inner Watercooling |
Inner Watercooling |
Inner Watercooling |
| RTO/W | Aircooling | Aircooling | Aircooling | Watercooling | |
Advantages
1. No lubricating oil in the pump chamber to get high purity vacuum.
2. Rotors processing with imported advanced equipment have the characteristic of good geometric symmetry, low noise and long service life.
3. The whole pump is made of aluminum alloy for corrosion resistance and lose heat quickly, so as to prolong the life of the pump.
4. Â Quick start, to reach a vacuum in a short time.
5. Compact-sized, light weight and small footprint.
ApplicationÂ
Roots Vacuum Pump are widely used in lighting, solar energy, electronics, semiconductors, vacuum drying, leak detection equipment, vacuum casting, vacuum ,elting, vacuum degassing, vacuum coating industry and vacuum distillation of the chemical pharmaceutical industry, etc.
WorkshopÂ
Â
Timeplex Industrial Limited is a professional and excellentmanufacturer for copper and aluminum thermal conduction products . The mainproduct ranges are profiles heat sinks , cold forging heat sinks, the cooling modulesand many kinds of CNC processing copper and aluminum products as well.
Our company was founded in 1989, we always insist the service tenet of [Meetingthe customers` demand, continuous innovation, reducing the heat ,decreasing thethermal resistance ,improving theproduct quality .extending the life of product" for our customers . Weconstantly recognized by our clients in the industry of IT ,communication,lamp, industrial electronic and so on. High quality heat conduction accessoriesmake our clients` product saving more energy , more environmental protection, higherquality ,longer life.
Product description:
With our vast experience & knowledge in this field, we are engaged in manufacturing a quality-assured ranges of Heat Sink.
The material used partly determines the extent of thermal conductivity. Copper and aluminum are the most widely used materials, though aluminum is the more common choice because copper is more expensive and heavier. Aluminum 6061 and 6063 are widely used with a thermal resistance of 166 and 201 W / mK, respectively.
Fan Heatsink,Cooling Fan With Heatsink,Heatsink Fan,Computer Cooling Fan
Timeplex Industrial Limited , https://www.hktimeplex.com