Seven Steps for Correct Installation of CNC Cutting Machine Servo Motor
The machining accuracy of CNC cutting machine is usually very much related to the matching motor. The installation of the components of the CNC cutting machine drive system is extremely important for the use of the whole machine. The CNC cutting machine is obviously superior to the traditional in the cutting accuracy and cutting efficiency. Hand-cut processing. In order to improve the machining accuracy of the CNC cutting machine, many users will try to adjust the motor configuration of the drive system, in which more of them are used for servo motor modification. However, many customers do not know how to correctly install. If the transmission components are not properly used in the installation process, not only the cutting efficiency and accuracy can not be improved, but the error of the cutting accuracy may be too great due to the wrong installation and correction. And even the electrodes burned. In order to avoid the losses caused by mistakes, I will explain to the majority of customers about the details of the servo motor used in the CNC cutting machine and the installation process.
Install servo motor We should pay attention to the following matters:
1. Do not use servo motor in corrosive gas, moisture, flammable, explosive environment to avoid fire;
2. Do not damage the cable or put excessive pressure on it, place heavy objects and squeeze it, otherwise it may cause electric shock and damage the motor;
3, do not put your hands inside the drive to avoid burning hands and cause electric shock;
4. Do not touch the rotating part of the motor by hand during the operation of the servo motor so as not to burn the hand;
5, do not set the controller in the electric furnace or large coil resistors and other heating body in order to avoid fire or cause failure;
6. Overcurrent protectors, leakage circuit breakers, overheating protectors and emergency brakes must be installed to avoid electric shock, injury and fire;
7. Switch off the power supply and confirm that there is no risk of electric shock before moving the motor, wiring, and checking to avoid the electric shock of the inspector.
8. Please fix the motor and confirm the operation of the test operation in the state of the CNC cutting machine system, and then connect the mechanical system to avoid injury.
When considering the modification of servo motors, our customers must measure their own technical strength. If we say that in order to save money, if the technology is not up to the standard, it must be retrofitted. If problems arise, it will certainly affect the entire company's production. We must not lose sight of one another, because we lose a little. Before you decide to modify the servo motor, you can contact the relevant company that modified the servo motor. In order to ensure that you can normal production, Xiaobian warm reminder, do not personally modified.
Chinese cutting machine trading network, allowing you to buy the rest assured! A variety of CNC cutting machine and CNC cutting equipment, a variety of cutting machine models, let the optional! Official website: /
Zowell RSEW multi-directional forklift is a material handling equipment designed for long and bulky material handling and stacking. Its unique design covers the advantages of common forklifts and stackers as well as 3-way VNA trucks. With three omni-directional wheels, it can drive in multiple directions such as parallel moving and oblique moving, so as able to maneuver smaller aisles and maximize your warehouse storage safely.
As a company with experience on narrow aisle electric forklifts for more than 15 years, Zowell always focuses on professional warehouse solutions and customer experience. RSEW series is featured with electric power featured with low noise and no emission, and can be equipped with lithium battery with convenient maintenance and longer service life. The load wheels are equipped with the five-stage steering deceleration and small control current, which enables the steering angle more precise and controllable, effectively extend the service life of the steering motor. From the aspect of security, Zowell multi-directional forklift is equipped with steering wheels display system and barking system to maximize safety.
In general, the man-machine engineering simulation design makes RSEW easier to operate, more accurate in control, providing a perfect solution for long materials handling and stacking. Meanwhile, we provide various types according to load capacity and lift height as well as additional options such as fork positioner and AGV modification to meet your practical needs. Please refer to the parameters attached on our products or ask our staff for help in any case.
Electric Hand Pallet Jack,Standing Pallet Jack,Electric High Lift Pallet Truck,Motorized Pallet Truck
Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.xianfengforklifts.com