Yutong uses engine thermal management technology to achieve passenger car fuel economy

Beijing, April 17 (Reporter Nan Chen) The reporter learned from Zhengzhou Yutong Group Co., Ltd. in Beijing on the 17th that the engine thermal management test started from the end of last year is progressing smoothly. At present, nearly one thousand Yutong buses have been adopted. Engine thermal management technology equipment can save 5%-10% of fuel in 100 kilometers.

According to Yutong technical personnel, the passenger car adopts engine thermal management technology, which mainly controls the temperature of the engine cooling water (86 degrees Celsius - 95 degrees Celsius), which can prolong the service life of the engine, make the fuel combustion more fully, and reduce the power consumption of the cooling fan. The engine is always working in the most suitable temperature environment, saving 5%-10% of fuel in 100 kilometers. At present, Yutong's newly developed models adopt this technology and perform performance tests in the early stage of development.

According to Yutong technical personnel, the test shows that the Yutong bus using this technology can save 2.45 liters of fuel in the city under 100 km. The actual tests conducted by the passengers of the 12 durable pilot bases randomly selected by Yutong showed that the passenger cars using engine thermal management technology can save 1 liter - 3 liters of fuel per 100 kilometers.

In 2006, Yutong Group's sales revenue was 10.139 billion yuan, accounting for more than 22% in the domestic passenger car market, and 2002 export buses, with an export value of 105 million US dollars.

Stainless Steel Cut Wire Shot As Conditioned

Cut Wire Shot is a very important and popular Metal Abrasive.It is often utilized in shot peening processes when ferrous contamination of work piece is forbidden. As the most cost-effective one, the stainlesss steel cut wire shot, also named Stainless Steel Shot, is widely used for shot peening processes on stainless steel or inconel parts. When Blasting stainless work pieces or other metals need to be down as a pristine surface, stainless cut wire may be a very good metal abrasive to take into consideration. Stainless Steel Cut Wire shot as conditioned is usually used for shot peening processes on stainless steel or inconel parts. As for Longlived stainless steel cut wire shot, the minimum diameter could be 0.15mm and maximum diameter is 3mm. If you want, it could be bigger as your demand.

Concerning stainless steel cut wire shot, it has a very bright surface, maintains its shape longer then cast abrasives and it has a dust free surface. Stainless Steel Cut Wire is available as cut or conditioned and with various chemical compositions.The bulk density of stainless steel cut wire shot is very high and must be taken into consideration in relation to its use in equipment. Suitable equipment must be selected to convey stainless steel shot.

Generally, stainless steel cut wire shot could be classfied into two kinds. One is Stainless Steel Cut Wire Shot AS Cut and as conditioned. And then, stainless steel cut wire shot as conditioned could also be divided into three small groups according to their different roundness and they are G1, g2, G3.

Cut Wire Shot As Conditioned,Stainless Ssteel Cut Wire Shot,Sus304Stainless Steel Cut Wire Shot Blasting,Sus304Stainless Steel Cut Wire Shot Sandblasting

Longlived Metal Products Co ., Ltd , https://www.tzlonglivedmetal.com