Submersible pump compact and lightweight, in rural areas play an important role in production and life, should pay attention to the following points in use.
First, the purchase of submersible pumps should pay attention to its model, flow and lift. If the specifications used inappropriately, will not be able to get enough water, can not play unit efficiency. In addition, we should also clarify the direction of rotation of the motor, some types of submersible pumps forward and reverse can be water, but the reversal of the small amount of water, the current is large, the reverse will damage the motor windings. To prevent submersible pump leakage in the water when working under the accident caused by electric shock, leakage protection switch should be installed.
Second, install the submersible pump, the cable should be overhead, the power cord should not be too long. Do not force the cable when the unit is launching, which may cause the power cord to break. Submersible pumps do not sink into the mud, otherwise it will lead to bad heat and burn the motor windings.
Third, try to avoid the boot at low voltage. When the voltage is too low, the motor speed will drop. If it is less than 70% of the rated speed, the centrifugal switch will be closed and the starting winding will be closed Power for a long time to heat or even burn the windings and capacitors. Do not switch the motor on and off frequently. This is because the pump will run back when it stops. If it is turned on immediately, the motor will start to load, causing the starting current to be too large to burn the winding.
Fourth, do not allow long-term overload pump operation, do not pumping large amounts of water, dehydration pump operation time should not be too long, so as not to overheat the motor and burned. During the operation of the unit, the operator must keep an eye on whether the operating voltage and current are within the values ​​specified on the nameplate. If not, the motor should be stopped to find out the cause and solve the problem.
Fifth, usually more than check the motor, found under the crack, rubber seal ring damage or failure, etc., should be promptly replaced or repaired to prevent water penetration into the machine.
Blister Packaging
We offer all kinds of blister packaging ,our main is custom blister packaging to meet the needs of different customer requirements.
We meet different customer's needs and incorporate them into the design of each blister package. Our packaging design team can develop a fully customized blister packaging that meets your exact specifications.We make a variety of shape plastic clamshell packaging and trays which will show your product in the best way!
Thermoforming Blister Tray packaging and other therformed blister tray offer high durability over carton box or corrugated paper ,blister insert tray are esay to manufacturer and are cost-effective,making this type of packaging highly popular and budget friendly.Thermoforming blister tray packaging and other blister tray is much faster than injection molding with a much lower tooling cost as well.
Blister clamshell packaging can be divided into double blister packaging and tri-fold clamshell .
Blister packaging is a unique packaging product. The appearance of the product is protruding and has a three-dimensional effect, and what is produced is the contour of the packaged article.
Blister packaging is mainly used in toys, stationery, electronics and other products. The main advantage of using blister clamshell packaging is to reflect the uniqueness of the product.
Plastic clamshell packaging ,clamshell blister packaging ,trapped blister packaging ,blister packaging ,double blister packaging
Shenzhen Stardeal Industrial Co.,Ltd , https://www.plasticblisterpacks.com