High Precision Horizontal CNC Lathe Machine

 C6136Dseries horizontal lathe
        Swing over bed Φ360 mm
Maximum turning diameter on tool rest Φ200mm
Two max. workpiece length between centers 1000  mm
Width of bed 312 mm
Spindle bore Φ52mm
Spindle end type ISO (GB) C6
Before 6, Morse taper spindle
Distance from spindle center to bed plane guide rail 180mm
Spindle speed series is turning 12, reverse 12 level
The spindle speed range is 30-1600r/min, reverse 30-1600r/min
There are 44 kinds of feed ranges: 0.039-1.05mm/r transverse feed range:0.019-0.52mm/r
Metric thread 25 kinds of 0.5-20mm
Module thread 24 kinds of 0.25-10mm
Inch thread 35 80-1.75 tooth / inch
30 kinds of diameter pitch thread 160-3.5dp
Spindle motor power  3/4 kw
Vertical square turret of tool holder
Tool holder Size 20×20mm
Maximum travel of upper / lower turret 140/240mm
Swivel angle of turret ±90°
Distance from spindle centerline to tool support surface 21mm
Quill Diameter Φ60 mm
Travel of tailstock sleeve 100 mm
Morse taper of tailstock sleeve taper No. 4
Cooling motor power 90W
Cooling water pump head 5m
Coolantdischarge 25 L/min
Power supply 380V + 10%, 50Hz + 1%, three-phase alternating currentambient temperature 0ºC~40ºC
relative humidity ≤92%
Dimension (Length * width * height)
1000mm  2180×970×1250 mm
Weight kg 1350
 
             

   C6136Dseries horizontal lathe
        Swing over bed Φ360 mm
Maximum turning diameter on tool rest Φ200mm
Two max. workpiece length between centers 1000  mm
Width of bed 312 mm
Spindle bore Φ52mm
Spindle end type ISO (GB) C6
Before 6, Morse taper spindle
Distance from spindle center to bed plane guide rail 180mm
Spindle speed series is turning 12, reverse 12 level
The spindle speed range is 30-1600r/min, reverse 30-1600r/min
There are 44 kinds of feed ranges: 0.039-1.05mm/r transverse feed range:0.019-0.52mm/r
Metric thread 25 kinds of 0.5-20mm
Module thread 24 kinds of 0.25-10mm
Inch thread 35 80-1.75 tooth / inch
30 kinds of diameter pitch thread 160-3.5dp
Spindle motor power  3/4 kw
Vertical square turret of tool holder
Tool holder Size 20×20mm
Maximum travel of upper / lower turret 140/240mm
Swivel angle of turret ±90°
Distance from spindle centerline to tool support surface 21mm
Quill Diameter Φ60 mm
Travel of tailstock sleeve 100 mm
Morse taper of tailstock sleeve taper No. 4
Cooling motor power 90W
Cooling water pump head 5m
Coolantdischarge 25 L/min
Power supply 380V + 10%, 50Hz + 1%, three-phase alternating currentambient temperature 0ºC~40ºC
relative humidity ≤92%
Dimension (Length * width * height)
1000mm  2180×970×1250 mm
Weight kg 1350
 
             

 

Cookware Set

We are professional on the Cookware set.

We can meet your special requirement of the cookware set.

Our cookware set is hot selling in worldwide.

Welcome to sent the inquiry and check our quotation.

Cookware set, stainless steel cookware set, nonstick cookware set, cookware cooking pot set, chef grad cookware set, cooking pot set

Jiangmen Wellway Houseware Co.,Ltd , https://www.jmwellway.com