In the past, the integrated core used in the motor, the copper wire of the winding was wound around the outlet nozzle from the outlet of the winder outlet, and was wound around the magnetic pole teeth. In the integrated core, it was performed on the narrow inner diameter side. Winding, the windings in the core slot cannot reach a high density configuration. Further, since the number of slots is large, the gap ratio as the outlet passage is also increased, so that it is necessary to form a stator having a low winding density. One way to solve this problem is to sparsely separate the core. However, the number of components is increased, and the transition line between the winding and the winding is broken. Therefore, the connection point of its subsequent processes will also increase, which will bring new problems to production.
In response to this situation, the company developed an exclusive split core. This is a bendable core that is linearly unfolded by a thin body portion. Because of the linear expansion, the winding operation has a relatively large space, thereby increasing the winding density. At the same time, the transition line between the windings does not have to be cut, and the winding can be continuously wound.
The articulated core of the joint expands the linear bendable core further, and there is ample space at the tooth circumference of the magnetic pole when winding, as shown in FIG. The teeth of each pole are required to be free to bend. To achieve this goal, an articulated core with a freely curved joint was designed. The core pieces constituting the joint joints each have a lap. At the center of the turn of the lap joint, the convex and concave dark drops (pins) are machined, and when they are overlapped together, a rotatable portion (joint) like a hinge is formed. This type of core has a punching and laminating speed in the stepping die, which is the same as the previous integrated core.
hot dipped galvanized welded rock cage
Welded gabions are wire mesh containers welded with high quality steel mesh.They can be filled on site with hard durable stone materials to form mass gravity retaining structures. Owing to their inflexibility, welded gabion can not adapt to differential settlement or be used in water courses ,In comparison with woven wire gabions, welded gabion offer a higher strength. In order to meet different project requirements, various wire diameters and unit sizes are available for welded gabion. It is composed of Welded Mesh panel and spring steel lacing wire.
As
a highly-accomplished wire mesh exporter, Kingdelong was established
jointly by China and South Korea in 1986, Our strategic location in
Anping County,Hebei province is only 300KM away from Beijing and
Tianjin, which offers us very competitive advantages both in trade and
logistics. Through two decades of hard work, Kingdelong company had
evolved into one of China`s largest wire mesh manufacturing
companies,Covering an area of over 200,000㎡, certificated by ISO 9001
& ISO 14001,as well as more than 450 diversified production
machines, which are either imported from foreign countries or developed
in-house.Wire mesh products find applications in a wide range of
industries, from Pharmacy to petroleum and chemical to textile.
Welded Gabion Mesh,Welded Wire Mesh,Mesh Welded Gabion Wire,Gabion Retaining Wall Wire
ANPING KINDELONG WIRE MESH CO.,LTD. , https://www.apkdlwiremesh.com